Follow this guide to connect and set up your hardware. There are two set-ups, depending on whether you have an integrated scale.

Connect your Register hardware

regular_set-up_jpeg_without_cables.jpg

 

Connect your Register hardware with an Integrated Scale

integrated_scale_set-up_without_cables.jpgSet up your Register hardware

Connect your hardware (as shown in the diagrams above) and set them up in this order:

  1. Set up your iPad.
  2. Install the Greenbits Register app on your iPad.
  3. Set up the receipt printer that you will use to print receipts at your Register.
  4. Set up the Zebra USB barcode scanner that you will use to scan barcodes on your products.
  5. Nevada only: If you are printing patient labels and package labels for deli-style flower sales at the Register, set up your Register label printer.
  6. For all other states: If you are printing patient labels and package labels for deli-style flower sales at the Register, set up your Register label printer.
  7. If you have an integrated scale at the Register, set up the Trendnet switch, the scale, and the Register label printer.

Set up your Back Office hardware

If you are going to print pre-pack labels and barcodes from your Back Office, set up your Back Office label printer: