Wireless WiFi Register Setup

This setup is not recommended. For current Register set-up information, see Set Up Your Hardware.

This guide walks you through setting up the discontinued Wireless Register set-up with the TSP650III Bluetooth receipt printer. With the Register kit for Wireless WiFi, your iPad connects to the iPad over Wi-Fi. Label printers and Ethernet receipt printers are connected with cables. For current Register set-up information, see Set Up Your Hardware. 

Set up your hardware in this order:

1. Set up your iPad.
2. Install the Greenbits Register app on your iPads.
3. Set up the receipt printer that you will use to print receipts at your Register.
   • Star mC-Print3 (USB/Ethernet)
   • Star TSP100III (Ethernet)
   • Star TSP650II (Bluetooth)
4. Set up the USB or Bluetooth barcode scanner that you will use to scan barcodes on your products.
5. Set up the Back Office label printer that you will use to print pre-pack labels and paraphernalia barcodes.
6. If you ordered a label printer to print deli-style flower labels and patient labels, set up your wired, ethernet register label printer.