Start up the Dutchie POS Register terminal and log in

1. Once you've plugged the Register terminal into a power outlet, it should start up automatically. If not, press and hold the power button on the back of the Register terminal monitor until the Elo logo appears.
2. If you see a blue startup screen, press Start. If you see “Please select a set-up option to proceed,” select Enroll with GMS.
3. Once the device boots up, the device will attempt to connect to the internet. If the device does not have an ethernet connection, you will be prompted to connect to Wi-Fi. We highly recommend a wired Ethernet connection instead of Wi-Fi, but if you have no wired connection available, select your Wi-Fi network from the list and enter the password.

   Having trouble connecting? Get help troubleshooting your network connection.

4. Wait patiently while the device installs Android OS updates and select the Next button to proceed through the setup process. If the network connection is interrupted, the terminal will reboot.
5. The Register terminal will connect to our device management service and begin to install the register application.
6. Regardless of what messages you see, no action is required. Please be patient while the setup process is running. This may take 15 minutes or more.
7. When the process is complete, you will see the POS application shortcut has been installed on the home page. Tap the application shortcut to launch the POS application, and you will be prompted to log in.

Log in to Dutchie POS

1. Enter your Region. Your Region name appears just after https:// in the URL you use to sign in to the Register on a computer.
2. Tap Select Region/Server.
3. Log in with your Dutchie POS username and password.

Log in to Greenbits

When startup is complete, you'll see the Greenbits login screen. Log in with your Greenbits username and password.

Next steps

Configure your peripherals:

• Receipt printer configuration
• Label printer configuration
• Barcode scanner configuration